Uppsats för avläggande av filosofie kandidatexamen iKulturvård, Landskapsvårdens hantverk15 hp, 2011.

The project was intended to produce a brush simulation plugin to the image processing program GIMP which would use a 6DOF drawing tablet for user input.Too ambitious goals coupled with compability issues between the resources used resulted in that no meaningful software was produced. Experience was however obtained, and this paper is intended to give an overview of relevant concepts for- and the process ofcreating a brush simulation..

I denna rapport redovisas ett examensarbete för högskoleingenjörer inom produktutveckling med inriktning industriell design. Arbetet är utfört på företaget Mase Brush AB i Eskilstuna och innefattar produktutveckling av ett kassettborstsystem. Kassettborstsystemet används till att sopa bort snö från flygbanor samt för att ta bort eventuella gummirester och smuts under sommaren.  Problemet studenterna fick baserades på en hypotes som skulle bevisas. Därefter har studenterna utvecklat ett koncept som löser problemet. Hypotesen innefattar teorier om en så kallad fläkteffekt som gör att ett luftdrag skapas som drar med sig snö till fel sida av systemet. Detta gör att flygbanorna inte blir helt fria från snö. Studenterna har bevisat hypotesen med hjälp utav enklare datasimuleringar samt tillverkat en prototyp som tester utförts på.

The Master Thesis work this report is based upon has been conducted in cooperation with Svea Teknik AB. Svea Teknik is a consultant firm which is developing parts of a tunnel boring machine on behalf of Atlas Copco. The machine is being developed to mechanically excavate hard rock by fixating itself in the tunnel and then press a large rotating cutter-wheel equipped with disc-cutters against the tunnel wall. The disc-cutters are the tools that are in direct contact with the hard rock and are therefore exposed to extensive wear and needs to be replaced on a regular basis.The purpose of this Master Thesis has been to develop a service equipment that will enable time effective and safe changes of disc-cutters. The disc-cutters have a diameter of 17 inches and weigh about 130 kg.

After the mandatory rules for clearing was removed in 1994, the clearing area has increased in Sweden. After the storms Gudrun and Per, the areas became planted with new plants, mainly spruce, but also other tree species. Storm areas are now being invaded by naturally rejuvenated birch in the tilling tracks. Since the birch often is initially growing faster than the spruce it is inhibiting the growth and is also damaging the spruce. The purpose of this thesis is to study the new brush saw with chain and compare it with the conventional clearing saw, mainly in terms of performance and ergonomics. The results show that the new brush saw with chain is very good in almost all clearing operations compared to the conventional clearing saw.

After the mandatory rules for clearing was removed in 1994, the clearing area has increased in Sweden. After the storms Gudrun and Per, the areas became planted with new plants, mainly spruce, but also other tree species. Storm areas are now being invaded by naturally rejuvenated birch in the tilling tracks. Since the birch often is initially growing faster than the spruce it is inhibiting the growth and is also damaging the spruce. The purpose of this thesis is to study the new brush saw with chain and compare it with the conventional clearing saw, mainly in terms of performance and ergonomics. The results show that the new brush saw with chain is very good in almost all clearing operations compared to the conventional clearing saw.

Uppsats för avläggande av filosofie kandidatexamen iKulturvård, Bygghantverk, 27 hp, 2012.

In the last decades, high speed cutting has become an attractive technology in the wood industry. The possibility of reducing global costs in addiction with an increase in productivity, were the main reasons for the enlargement of the use of this technology. As usual, these advantages are accompanied by disadvantages that should be carefully analyzed. If on the one hand cutting forces are reduced with increasing cutting speeds, on the other hand, the centrifugal forces affecting the tool are higher. Exposed to such high loads, there is a considerable risk of tool failure that embeds hazards for both machine and workers.

Hemp is an ancient cultivated plant that came to Sweden in the 1st to 2nd Century and was particularly interesting for use for food, clothing and building materials. Over time, other applications have been developed for hemp, e.g. in energy and health products. Interesting new uses for hemp continue to be identified and this fascinating plant has incredibly versatile applications.In this project, seed production of industrial hemp in Sweden was studied and evaluated. Five different methods are described, four of which are proven under Swedish conditions.

This thesis describes how the chip space and coolant channels are designed in today?s mills, the ideas behind the design and what is considered to be the best method of cooling. It contains ideas on how the chip space can be simplified. It contains several concepts on how the cooling could be designed for better efficiency and manufacturability. There are also suggestions on how the cooling could be stopped when the cutter isn?t cutting.

Denna rapport handlar om kärnan i ett borstsystem som används på flygplatsers landningsbanor för att upprätthålla ett standardiserat friktionsvärde. Att utföra borstningen för att upprätthålla friktionsvärdet medför även att landningsbanan blir fri från diverse hinder och upprätthåller en jämn yta, dvs. att det inte finns någon smuts som kan skada maskineri. Valsen är kärnan i systemet. Arbetet genomförs för att Mase Brush Sweden AB vill fortsätta att driva marknaden framåt och ta fler marknadsandelar.Målet med detta arbete är att sänka vikten på den befintliga valsen samt underlätta produktionen för att sänka kostnaderna för Mase Brush Sweden AB.

Syfte ? Syftet med examensarbetet är att minimera eller helt eliminera den utböjning som uppstår i Husqvarnas trimmer 536 LiR från handtag ner till motor och trimmerhuvud då en 5 kilos vikt hängs i handtaget.Metod ? En konceptstudie har utförts på Husqvarnas trimmer 536 LiR för att undersöka och utvärdera hur problemet med trimmern ser ut i dagsläget och därifrån ta fram olika koncept för att minimera utböjningen. Arbetet har följt en Stage-Gate produktutvecklingsprocess med sju steg från att skriva kravspecifikation till att ta fram och testa prototyper. Koncept genererades med metoderna brainstorming och Reverse Engineering och sållades sedan med Pughs beslutsmatris. Finita elementmetoden användes för att utvärdera produkten och för att analysera vissa koncept.

The aim of this thesis is to examine the characteristics of film cataloguing, and to compare general as in library use and specific as in archival use cataloguing rules. Most rules, both in archives and libraries, use the book as a point of reference. This is somewhat unfortunate on account of the great difference between books and films. The method used is studies of literature and qualitative interviews with three persons whose professional duties include cataloguing of films. The sets of rules which are studied are Katalogiseringsregler för svenska bibliotek KRS and The FIAF Cataloguing Rules for Film Archives.

Logosol is a company that produce small-scale wood processing products. To be able to expand the business Logosol have decided to increase exports, their target markets are the US, Russia, Germany and Norway. The expansion has mainly been through subsidiaries situated on the abroad markets. The subsidiaries have done poor results and that has influenced the whole company. CEO Bengt-Olov Byström made a decision to sell out the units to the people who worked in the business.

The main purpose of this study is to investigate how to reduce the high, and every decade raising, pre-clearance cost. The pre-clearance is today carried out with a brush saw and paid per labour hour. All small trees not suitable for pulpwood are removed to simplify the later work of the harvester. The study compares the economic results from thinning of four parcels each treated differently regarding harsh or light pre-clearance and extraction of only pulpwood, or both pulpwood and fuel wood. In this type of spruce stand the study indicates that a lighter pre-clearance, followed up with both pulpwood and a fuel wood extraction, has a much better economy than the traditional method of hard pre-clearance and only pulpwood extraction..